6.5MM LOW PROFILE HEX SCREW 25MM
Received Jul 14, 2026 · Event occurred Jun 17, 2026
Report 0002249697-2026-00615 · MDR key 25817364
Device
Generic name
Prosthesis, Hip, Semi-constrained, Metal/polymer, Cemented
Manufacturer
Stryker Orthopaedics-mahwahCatalog number
7030-6525
Lot number
RA5D
Product problems
- Adverse Event Without Identified Device or Use Problem
Patient
61 YR · Male
- Nerve Damage
Narrative
Additional Manufacturer Narrative
REVIEW OF THE DEVICE HISTORY RECORDS INDICATE THAT DEVICES WERE MANUFACTURED AND ACCEPTED INTO FINAL STOCK WITH NO REPORTED DISCREPANCIES. THERE HAVE BEEN NO OTHER EVENTS FOR THE LOT REFERENCED. IF ADDITIONAL INFORMATION IS RECEIVED, IT WILL BE PROVIDED IN A SUPPLEMENTAL REPORT UPON COMPLETION OF THE INVESTIGATION.
Description of Event or Problem
THE FOLLOWING INFORMATION WAS PROVIDED: REVISED A RIGHT HIP DUE TO SCREWS BEING TOO LONG AND IMPINGING ON A NERVE. HE REMOVED ALL FOUR OF THE ORIGINAL OSTEOLOCK SCREWS USED ON THE AUGMENT AND REPLACED WITH ONE 20MM SCREW. THEY OPENED TWO OF THE 20MM SCREWS BUT ENDED UP USING ONLY ONE OF THEM AS THE SECOND ONE DIDN'T GET A GOOD BITE WITH THE BONE. IT WAS UNKNOWN WHICH ONE OF THE TWO SCREWS WAS USED AND NOT USED.